Recommended Layout #1

Recommended Layout #2

Player 1 is the unit with an HDMI output as well as a power input. All other units are interchangeable.

To setup your pedestal you will need the following included items.

1. 3 USB cables
2. 1 Power adapter
3. 1 HDMI Cable

• Place each of your pedestals as shown in the picture above.
• Connect each of the units with the included USB wire as shown in the picture above. (Player 1 has 2 USB outputs- use the USB output closest to the HDMI out first. Depending on the layout you have chosen to setup your units in, you may use the other USB output for Player 3 or for accessories like Light guns etc.). 
• Next, connect an HDMI wire from Player 1 to your TV.
• Plug in the power adapter to the Player 1 Unit.

The system's game board is installed in the bottom of Player 1 unit. If you need to access the game board's settings, you will need to unscrew the bottom access panel and press the "settings" button on the game board. Doing so will output a settings menu screen onto your TV.